The proper method to take out the light strip:
BLUE DIAMOND are exported all over the world and different industries with quality first. Our belief is to provide our customers with more and better high value-added products. Let's create a better future together.
1. Use the tube to pass through the spool and unroll the luminous tape horizontally.
2. When installing, one person drags the spool while the other takes out the light strip for installation.
The improper method to take out the light strips:
1. Avoid placing the spool directly on the ground and pulling out the light strip without proper guidance.
2. Refrain from leaving one end of the pool light strip hanging in the air while performing the installation process.
The proper method to bend the light strip:
1. Bend the light strip along the side without emitting light.
Contact us to discuss your requirements of underwater led strip lights for pools. Our experienced sales team can help you identify the options that best suit your needs.
2. Make sure the bending angle of the light strip is equal to or greater than 60 degrees.
3. Install the strip at right 90-degree angles or curved corners, securing it with a mounting buckle located 4 inches (10 cm) on either side of the curve. Please keep a space of more than 1.65 inches between the light strip and the bend.
The improper method to Bend The Strip Lights:
1. Avoid twisting the light strip horizontally.
2. Avoid bending along the side of the strip.
3. Do not tighten the strip tightly at the corner of the fold.
4. Make sure the strip is not installed on a curve less than 60 degrees, especially around a wall less than 1.58 inches (4 cm) thick.
If you want to learn more, please visit our website CCT Flexible Led Strip.