(sae 100 hydraulic hose)
Link to SANYEFLEX
The SAE 100 classification defines hydraulic hoses capable of sustaining 100 PSI per RPM with ±2% pressure tolerance. Industry surveys reveal 87% of hydraulic failures originate from hose incompatibility, making SAE 100 R14/R15/R17 compliance critical. These hoses demonstrate 40% greater burst resistance compared to non-certified alternatives, with average service life extending to 8,000 operating hours under continuous 200°F conditions.
Fourth-generation reinforcement matrices in SAE 100 hoses achieve 360° abrasion resistance through proprietary textile braiding. Laboratory tests show:
Modular construction enables 14 combinations of inner tube materials and wire spiral patterns. Field data indicates customized SAE 100 hoses reduce maintenance intervals by 65% in mining applications. Common adaptations include:
Third-party validation under ISO protocols confirms SAE 100 R-series hoses maintain 98.7% flow efficiency after 10,000 dynamic pressure cycles. Comparative data highlights:
A recent automotive press line retrofit achieved 22% energy savings through SAE 100 R17 implementation. Documented outcomes across sectors:
IndustryHose TypeMTBF Increase AgricultureR141,200 hours MarineR hours AerospaceR172,150 hoursLifecycle cost analysis demonstrates 34% TCO reduction over 7-year periods when upgrading to SAE 100 R15/R17 architectures. Predictive maintenance integrations now enable 92% failure probability detection 48 hours pre-occurrence. Industry projections estimate 11.7% CAGR growth for SAE 100-compliant hoses through , driven by automation demands in material handling and energy sectors.
(sae 100 hydraulic hose)
If you are looking for more details, kindly visit sae 100 r15.
SAE 100 R15 steel wire spiraled hydraulic hose is suitable to deliver petroleum based hydraulic oils and it is also mainly used in high pressure working conditions. It is composed of three parts: tube, reinforcement and cover. The tube is made from black oil resistant synthetic rubber, making it perform well in conveying petroleum based hydraulic oils. The reinforcement is made from multiple layers of high tensile and high strength thick spiraled steel wire in alternating direction, making the hose have extremely high working pressure. Besides, the steel wire spiraled hydraulic hose can bear higher working pressure than steel wire reinforced hydraulic hose. Therefore, the hose performs well in very high pressure. The cover is made from high quality black synthetic rubber, making the hose resistant to abrasion, corrosion, cut, weather, ozone, aging and sunlight.
Extremely high pressure, high impulse hydraulic applications. This hose is designed to meet all the requirements of SAE 100R13 R15, EN 856 4SH, EN856 4SP and EN856 R13, EN856 R15. Compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum based fluids.
Tube: Black and oil resident nitrile rubber
Reinforce: Four (six for 1-1/4”, 1-1/2” and 2”) alternating layers of spiraled, high tensile steel wire.
Cover: Black and oil resistant nitrile rubber
Temperature Range: -40℉ to +250℉ (-40℃ to +121℃)
Application :
SAE 100 R13 can be used for forklift, hydraulic engine, oilfield extraction machinery, mine/road/construction machinery and so on.
Raw Material:
Imported LG NBR from South Korea,
Imported BELKTA steel wire with high tensile strength (Mpa) from Belgium.
Good quality materials provide our hydraulic hose steady performance, good decentrality and excellent oil resistance.
Factory Workshop:
Our factory introduce advanced technology and equipment to make the best quality hydraulic hose.
Our bunching machine is SEJIN MACHINE from Korea.The advantages of the machine are high accuracy and high consistency. The suspension difference < 70MM, while the international standard is 120MM.
We use Mitsubishi electric control braiding machine to get high accuracy data collection, real-time braiding angle monitoring and correction.
Laboratory:
Our factory has strong quality control team and we set up advanced laboratory.
Before the mass production, we test each batch of raw material
After the production, we test each hose to guarantee a 100% qualification.
Each hose is tested 2 times on working pressure.
We do everything possible to supply good quality goods to our customer.
Packing:
After the production, we will pack the hydraulic hose. In general, the packing could be woven bag and plastic film. Special packing is available on your demand.
Are you interested in learning more about china four wire spiral hydraulic hose? Contact us today to secure an expert consultation!