AIPU is proud to say we’ve shared over 15 years experiences in screen manufacture. We are able to produce various kinds of replacement shaker screen for different makes and models shaker. Such as the Mongoose series, Meerkat series, MD series, ALS series, BEM series; the Cobra series, the LCM series, the VNM series, the VSM series, the KPT series, the series, and so on. The accurate cut point and great durability lead less cost on mud loss also screen consumption.
Goto Shengjia to know more.
Besides listed screens, there are also many other models and makes of shaker screen. Such as the SCOMI, DFE shaker screens, and so on. Please be assured, Aipu will provide you all exact fit replacement screen. If your shaker screen is very special and rarely used, then just give us the specifications and we’ll build it accordingly to fit your shakers exactly.
Remark:All listed shaker screens are right fit replacement panels but not genuine ones. Furthermore, the M-I SWACO, NOV, DERRICK, KEMTRON, TRI-FLO, FSI, VORTEX, NATIONAL, FLC, MONGOOSE, etc. are the marks and reserved by original shaker screen manufacturer. All information is just as a reference.
The D100 value represents the diameter of the coarsest particle (in microns) which will pass through the screen during a dry laboratory test and is a single number, not a range of sizes.
The API screen designation for a screen is the API-defined range of sizes into which the D100 value falls. Some of the coarser size classes span quite a large range of D100 values.
The D100 value is the finest particle diameter at which the screen no longer sends 100% of the particles to the discard stream. This is also the coarsest particle that will pass through the screen.
The D50 value is the particle size at which the screen sends 50% of the particles to the “overs�?(discard), while the remaining 50% report to the “unders�?(undersized stream) and the D100 should not be compared in any way. The D50 was interpreted as the micron size where a screen makesa 50/50 split.
The API RP 13C D100 is a very specific value determined from a carefully-controlled laboratory procedure so that any laboratory should measure the same value for any given screen cloth.
If you are looking for more details, kindly visit Mongoose Shale Shaker Screen Replacement.
Yes, more than half of the particles that are coarser than D50 and finer than D100 will report to the overs. A significant portion of the particles finer than D50 will also report to the unders. (By definition, every particle classified in the D100 size or coarser will report to the overs as expected.)
The biggest variation is due to the shift from the D50 value to the D100 value.
The previous test procedure for screens, API RP 13E, measured the distribution of the screen holes as measured by light, not solids. Subsequently, the screens were labeled using the D50, D16 and D84 separation curve.
The current test procedure, API RP 13C, measures the coarsest particle which passes through the screen, using a much more accurate and repeatable test method. The screens are now labeled using the D100 size criteria.
PMD screen is the corrugated shaker screen with more effective filtration area. It really benefits much on shaker performance during solids control. Some clients comment, the pyramid shaker screen seems shorter life. Please do remember, when we utilize the PMD screen panel we have to decrease the shaker deck angle. If possible, we kindly suggest combine flat panel and PMD panel together on one shaker. Put the flat ones at solids discharge end. This will help much to save PMD screen life and, achieve higher efficiency than all flat panel fit on shaker.
The new API RP 13C labeling practice provides an excellent standard and benchmark for comparing one screen manufacturer’s screen separation against another. The closer the D100 values, even within the same size class, the better the comparison will be.
Aipu will work with customers to ensure that screen comparison tests are performed in a fair manner to both the competition and to Aipu, allowing the development of a balanced test plan, including a double-blind particle size analysis protocol, whenever a screen comparison is to be conducted.
Packing shaker screens is based on certain shaker screen type. Cater for most customers�?demand we usually pack the framed screen as 1 panel per carton, while the hook strap ones will be 2 panels per carton. And almost screen panels will be packed on poly wood pallets or boxes with bundle belt. Every package will be marked with package detail for convenient quantity re-check. Packages will be seaworthy and airworthy to avoid any damage or loss.
Contact us to discuss your requirements of Brandt VSM300 Primary Composite Screen Replacement. Our experienced sales team can help you identify the options that best suit your needs.