Specific sharing of the advantages of Painted Aluminum Coil

1. The surface of the color Painted Aluminum Coil is smooth, and there is no composite high-temperature indentation on the surface. There is no residual stress on the board surface and no deformation after shearing.
2. The Painted Aluminum Coil has good mechanical performance, light weight, high strength, and quick and convenient installation and construction. High-quality aluminum materials, plastics and adhesives are selected, and advanced composite technology is adopted. The product has the bending and flexural strength required by the decorative board. In the four seasons, the change of wind pressure, temperature, humidity and other factors will not cause bending, deformation, expansion, etc.
3. The Painted Aluminum Coil should have good weather resistance, and the paint pattern formed by coating and high temperature baking has high gloss retention, good color stability, and many colors, which can meet the various color requirements of modern buildings, and the color difference changes extremely small.
4. The Painted Aluminum Coil needs to be environmentally friendly and safe. The main component of the fluorocarbon polymer coating is Kynar500 fluorocarbon resin. This kind of fluorocarbon resin has durable bonding force and the most stable molecular structure, which determines the products treated by fluorocarbon spraying. All can resist wind, rain, industrial waste gas, acid rain and other erosion for a long time, can withstand harsh weather environment, and will not change color, fade, peel, powder, etc., and the service life is more than 20 years. Strong low pollution, it is difficult to attach pollutants on the surface, it can be kept clean for a long time, easy to maintain and clean, does not release any toxic gas, does not cause keel and fixing parts to rust, and is flame retardant. Not lower than B1 level according to national regulations.
5. The Painted Aluminum Coil has excellent decoration and many shapes. The coating color can be customized according to the needs of customers, giving customers a wide range of individual choices, enriching the humanistic connotation of the product, and giving people more beautiful enjoyment.
6. The lightning resistance of the Painted Aluminum Coil: it can be used as a good conductor of electricity, and the huge lightning strike current can be quickly transported to the ground through the building grounding system.

LITONG supply professional and honest service.

Pre-painted aluminum coil is a type of aluminum that has been coated with a layer of paint or other protective finish before being formed into its final shape.

This coating process typically involves cleaning the aluminum coil, applying a primer, and then adding a topcoat of paint or other material.

The result is a product that combines the lightweight and corrosion-resistant properties of aluminum with the added benefits of a durable, aesthetically pleasing finish.

Aluminum Alloy (Substrate)

Pre-painted aluminum coils can be made from various aluminum alloys, each offering different properties to suit specific applications. Some common aluminum alloys used for pre-painted aluminum include:

Series (Pure Aluminum)

– Example:

– Characteristics: High corrosion resistance, high thermal and electrical conductivity, and excellent workability. However, it has lower strength compared to other alloys.

– Applications: Roofing, cladding, and other applications where high corrosion resistance is required.

Series (Aluminum-Manganese Alloys)

– Example: ,

– Characteristics: Good corrosion resistance, moderate strength, good workability, and excellent formability.

– Applications: Building panels, gutters, downspouts, and other architectural applications.

Series (Aluminum-Magnesium Alloys)

– Example: , ,

– Characteristics: Excellent corrosion resistance, higher strength than series, good weldability, and good workability.

– Applications: Marine environments, automotive parts, and structural applications.

Series (Aluminum-Magnesium-Silicon Alloys)

– Example: ,

– Characteristics: Good mechanical properties, good corrosion resistance, good weldability, and moderate to high strength.

– Applications: Structural applications, architectural applications, and transportation industries.

Series (Other Alloys)

– Example:

– Characteristics: Often used for specific applications like packaging due to its good formability and corrosion resistance.

– Applications: Food and beverage packaging, pharmaceutical packaging.

Prepainted Aluminum vs. Prepainted Steel

Here’s a table that compares the differences between prepainted aluminum coil and prepainted steel coil:

AspectPrepainted Aluminum CoilPrepainted Steel Coil WeightLighter; approximately one-third the weight of steelHeavier; higher density compared to aluminum Corrosion ResistanceExcellent; naturally resistant to corrosionGood, but typically requires additional coatings for protection StrengthSofter and more malleable; less tensile strengthHigher tensile strength; more suitable for structural applications Thermal ConductivityHigher; better conductor of heat and electricityLower; less efficient in conducting heat and electricity AestheticsAvailable in various colors and finishes; retains lusterAvailable in various colors and finishes; may require more maintenance to retain appearance DurabilityResistant to weathering; less prone to rustDurable but can rust if coating is damaged CostGenerally more expensive due to material and propertiesGenerally less expensive; more cost-effective for large-scale applications RecyclabilityHighly recyclable; retains value in recycling processesAlso recyclable, but steel recycling processes are more established ApplicationsUsed in aerospace, automotive, construction (e.g., roofing, cladding), consumer goodsUsed in construction (e.g., structural components, roofing), automotive, appliances Environmental ImpactLower energy consumption in production; less environmental impactHigher energy consumption in production; more environmental considerations

This table highlights the key differences between prepainted aluminum and prepainted steel coils, helping in making an informed decision based on specific needs and applications.

Type of Paint

• Polyester: Suitable for general applications with good durability and flexibility. It is cost-effective and offers a range of finishes.

• Silicone-Modified Polyester (SMP): Provides better durability and weather resistance compared to regular polyester. It is ideal for exterior applications.

• Polyvinylidene Fluoride (PVDF): Known for its excellent weathering properties, UV resistance, and longevity. It is often used in high-end architectural applications.

Specification

By understanding the specifications, you can have a deeper understanding of pre-coated aluminum products. Here are some common specifications:

If you are looking for more details, kindly visit painted aluminum coil for gutters.

Alloy and Temper

– Alloy Series: , , , , series

– Temper: H14, H24, H26, H18, etc.

Dimensions

– Thickness: 0.2mm to 1.5mm (customizable based on requirements)

– Width: 600mm to mm (customizable based on requirements)

– Coil ID: 405mm, 505mm, 605mm

– Coil OD: Up to mm

Coating

– Type of Coating: Polyester (PE), Polyvinylidene Fluoride (PVDF), Epoxy, Polyurethane, etc.

– Coating Thickness:

  – Topside: 15-30 microns

  – Backside: 5-10 microns

– Color: Available in a wide range of colors based on RAL or custom color matching

Mechanical Properties

– Tensile Strength: 130-300 MPa

– Yield Strength: 110-260 MPa

– Elongation: 1-10%

Surface Finish

– Gloss: High gloss, semi-gloss, matte

– Pattern: Solid colors, metallic colors, wood grain, stone, etc.

Protective Film

– Type: PE, PVC

– Thickness: 30-80 microns

Packaging

– Inner Core: Paper or metal

– Outer Packaging: Waterproof paper, plastic film, wooden or metal pallets

Production Process

The production process of pre-coated aluminum has five steps, namely coil input, cleaning and chemical treatment, painting, curing and finished product output.

1. Raw material coil input: the uncoiler continuously unwinds to ensure the continuous and stable input of the coil into the production line,

2. Surface cleaning and chemical treatment: the upper and lower surfaces of the aluminum coil must be cleaned and chemically pretreated to ensure that the paint can adhere firmly;

3. Painting: a production line has at least two roller coaters to ensure two layers of topcoat and primer;

4. Curing: refers to the aluminum coil that has just been painted to be cured before contacting the next roller surface to avoid mutual adhesion and damage. Generally speaking, it includes at least two curing boxes;