To initiate the industrial mesh buying process, you should reach out and supply the required mesh specification. This includes the length (rolled goods), dimensions (cut-to-size pieces), opening size, wire diameter, and weave pattern.
If you want to learn more, please visit our website Ruiyun.
While you may not know every specification you need, the more information you supply, the better we will be able to identify if your order fits our scope of work and calculate the logistics required to produce the mesh. Additionally, if you can supply samples of the wire mesh specification you wish to purchase, it can be reverse-engineered and recreated.
You should also provide information that accurately illustrates how the mesh will be used. This allows us to properly understand your needs and deliver a solution that resolves your concerns.
After reviewing your specifications with our engineering team, a quote reflecting all aspects of the order will be sent. If you accept the quote, the final step will be to submit a purchase order.
It's at this point that your mesh will begin being fabricated, with order confirmations, tracking numbers, and fabrication updates being sent to you.
The way in which woven wire mesh is packaged will vary depending on the manufacturer. That said, rolls and cut-to-size pieces are most often shipped in custom pallets.
With rolls in particular, lengths of 25 or 30 meters, with half lengths of 12.5 or 15 meters are standard. NOTE: These standard lengths are expected to fall within +/- 10% of the invoiced length.
It is important to remember that partial lengths are available. But a roll cannot consist of three pieces, and each roll must reach at least 2.5 meters.
The width of the roll must be greater than the nominal width, up to 2%.
Cut-to-size pieces, of course, are made to order based on the sides, lengths, radi, and angles set by the customer. Regardless of the form factor, woven wire will arrive with a label containing the following information:
When your woven wire order arrives at your facility, you should, in most cases, also receive the associated inspection documentation. Based on the amount of testing you mesh underwent, you can expect:
Product Name: Nickel Mesh
CAS #: -02-0
Relevant identified uses of the substance: Scientific research and development
Supplier details:
Stanford Advanced Materials
:
: (949) 407-
Address: Birtcher Dr., Lake Forest, CA U.S.A.
Classification of the substance or mixture
Classification according to Regulation (EC) No /
GHS08 Health hazard
Carc. 2 H351 Suspected of causing cancer.
STOT RE 1 H372 Causes damage to the lung, the kidneys and the liver through prolonged or
repeated exposure. Route of exposure: Inhalative.
GHS07
Skin Sens. 1 H317 May cause an allergic skin reaction.
Classification according to Directive 67/548/EEC or Directive /45/EC
T; Toxic
R48/23: Toxic: danger of serious damage to health by prolonged exposure through inhalation.
Xn; Harmful
R40: Limited evidence of a carcinogenic effect.
Xi; Sensitizing
R43: May cause sensitization by skin contact.
Carc. Cat. 3
Information concerning particular hazards for human and environment:
N/A
Hazards not otherwise classified
No data availableLabel elements
Labelling according to Regulation (EC) No /
The substance is classified and labeled according to the CLP regulation.
Hazard pictograms
GHS07 GHS08
Signal word: Danger
Hazard statements
H317 May cause an allergic skin reaction.
H351 Suspected of causing cancer.
H372 Causes damage to the lung, the kidneys and the liver through prolonged or repeated exposure.
Route of exposure: Inhalative.
Precautionary statements
P260 Do not breathe dust/fume/gas/mist/vapors/spray.
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P363 Wash contaminated clothing before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international
regulations.
WHMIS classification
D2A - Very toxic material causing other toxic effects
Classification system
HMIS ratings (scale 0-4)
(Hazardous Materials Identification System)
HEALTH
FIRE
REACTIVITY
1
0
0
Health (acute effects) = 1
Flammability = 0
Physical Hazard = 0
Other hazards
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Substances
CAS No. / Substance Name:
-02-0 Nickel
Identification number(s):
EC number: 231-111-4
Index number: 028-002-00-7
Description of first aid measures
General information
No special measures required.
If inhaled:
Supply fresh air and to be sure call for a doctor.
Seek medical treatment in case of complaints.
In case of skin contact:
Generally the product does not irritate the skin.
In case of eye contact:
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If swallowed:
If symptoms persist consult doctor.
Information for doctor
Most important symptoms and effects, both acute and delayed
No data available
Indication of any immediate medical attention and special treatment needed
No data available
Extinguishing media
Suitable extinguishing agents
Special powder for metal fires. Do not use water.
For safety reasons unsuitable extinguishing agents
Water
Special hazards arising from the substance or mixture
If this product is involved in a fire, the following can be released:
Toxic metal oxide fume
Advice for firefighters
Protective equipment:
No special measures required.
Personal precautions, protective equipment and emergency procedures
Not required.
Environmental precautions:
Do not allow material to be released to the environment without official permits.
Do not allow product to enter drains, sewage systems, or other water courses.
Do not allow material to penetrate the ground or soil.
Methods and materials for containment and cleanup:
Dispose of contaminated material as waste according to section 13.
Prevention of secondary hazards:
No special measures required.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
Handling
Precautions for safe handling
Keep container tightly sealed.
Store in cool, dry place in tightly closed containers.
Ensure good ventilation at the workplace.
Information about protection against explosions and fires:
No special measures required.
Conditions for safe storage, including any incompatibilities
Requirements to be met by storerooms and receptacles:
No special requirements.
Information about storage in one common storage facility:
No data available
Further information about storage conditions:
Keep container tightly sealed.
Store in cool, dry conditions in well-sealed containers.
Specific end use(s)
No data available
Additional information about design of technical systems:
No further data; see section 7.
Control parameters
Components with limit values that require monitoring at the workplace:
-02-0 Nickel (100.0%)
PEL (USA) Long-term value: 1 mg/m
3
REL (USA) Long-term value: 0.015 mg/m
3
as Ni; See Pocket Guide App. A
TLV (USA) Long-term value: 1.5* mg/m
3
elemental, *inhalable fraction
EL (Canada) Long-term value: 0.05 mg/m
3
as Ni; ACIGH A1, IARC 1
EV (Canada) Long-term value: 1* 0.2** 0.1*** mg/m
3
inh.;*metal;**insol. compds.;***soluble compds.
Additional information: No data
Exposure controls
Personal protective equipment
Follow typical protective and hygienic practices for handling chemicals.
Maintain an ergonomically appropriate working environment.
Breathing equipment: Not required.
Protection of hands: Not required.
Penetration time of glove material (in minutes)
No data available
Eye protection: Safety glasses
Body protection: Protective work clothing.
Information on basic physical and chemical propertiesAppearance:
If you want to learn more, please visit our website nickel wire mesh.
Form: Solid in various forms
Color: Silver grey
Odor: Odorless
Odor threshold: No data available.
pH: N/A
Melting point/Melting range: °C ( °F)
Boiling point/Boiling range: °C ( °F)
Sublimation temperature / start: No data available
Flammability (solid, gas): No data available.
Ignition temperature: No data available
Decomposition temperature: No data available
Autoignition: No data available.
Danger of explosion: No data available.
Explosion limits:
Lower: No data available
Upper: No data available
Vapor pressure: N/A
Density at 20 °C (68 °F): 8.908 g/cm
3
(74.337 lbs/gal)
Relative density: No data available.
Vapor density: N/A
Evaporation rate: N/A
Solubility in Water (H
2
O): Insoluble
Partition coefficient (n-octanol/water): No data available.
Viscosity:
Dynamic: N/A
Kinematic: N/A
Other information
No data available
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Thermal decomposition / conditions to be avoided:
Decomposition will not occur if used and stored according to specifications.
Possibility of hazardous reactions
No dangerous reactions known
Conditions to avoid
No data available
Incompatible materials:
No data available
Hazardous decomposition products:
Toxic metal oxide fume
Information on toxicological effects
Acute toxicity:The Registry of Toxic Effects of Chemical Substances (RTECS) contains acute toxicity data for this
substance.
LD/LC50 values that are relevant for classification: No data
Skin irritation or corrosion:
Powder: irritant effect
Eye irritation or corrosion:
Powder: irritant effect
Sensitization:
May cause an allergic skin reaction.
Germ cell mutagenicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains mutation data for this
substance.
Carcinogenicity:
Suspected of causing cancer.
IARC-2B: Possibly carcinogenic to humans: limited evidence in humans in the absence of sufficient
evidence in experimental animals.
NTP-R: Reasonably anticipated to be a carcinogen: limited evidence from studies in humans or
sufficient evidence from studies in experimental animals.
ACGIH A5: Not suspected as a human carcinogen: Not suspected as a human carcinogen on the
basis of properly conducted epidemiologic studies in humans.
Studies have sufficiently long follow-up, reliable exposure histories, sufficiently high dose, and
adequate statistical power to conclude that exposure to the agent does not convey a significant risk of
cancer to humans. Evidence suggesting a lack of carcinogenicity in experimental animals will be
considered if it is supported byother relevant data.
The Registry of Toxic Effects of Chemical Substances (RTECS) contains tumorigenic and/or
carcinogenic and/or neoplastic data for this substance.
Reproductive toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains reproductive data for this
substance.
Specific target organ system toxicity - repeated exposure:
Causes damage to the lung, the kidneys and the liver through prolonged or repeated exposure. Route
of exposure: Inhalative.
Specific target organ system toxicity - single exposure: No effects known.
Aspiration hazard: No effects known.
Subacute to chronic toxicity:
The Registry of Toxic Effects of Chemical Substances (RTECS) contains multiple dose toxicity data for
this substance.
Additional toxicological information:
To the best of our knowledge the acute and chronic toxicity of this substance is not fully known.
Toxicity
Aquatic toxicity:
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Additional ecological information:
Do not allow product to reach groundwater, water courses, or sewage systems.Do not allow material to be released to the environment without official permits.
Danger to drinking water if even small quantities leak into the ground.
Avoid transfer into the environment.
Results of PBT and vPvB assessment
PBT: N/A
vPvB: N/A
Waste treatment methods
Recommendation
Consult official regulations to ensure proper disposal.
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
UN-Number
DOT, ADN, IMDG, IATA
N/A
UN proper shipping name
DOT, ADN, IMDG, IATA
N/A
Transport hazard class(es)
DOT, ADR, ADN, IMDG, IATA
Class
N/A
Packing group
DOT, IMDG, IATA
N/A
Environmental hazards:
N/A
Special precautions for user
N/A
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
N/A
Transport/Additional information:
DOT
Marine Pollutant (DOT):
No
Safety, health and environmental regulations/legislation specific for the substance or mixture
National regulations
All components of this product are listed in the U.S. Environmental Protection Agency Toxic
Substances Control Act Chemical substance Inventory.
All components of this product are listed on the Canadian Domestic Substances List (DSL).
SARA Section 313 (specific toxic chemical listings)-02-0 Nickel
California Proposition 65
Prop 65 - Chemicals known to cause cancer
-02-0 Nickel
Prop 65 - Developmental toxicity
Substance is not listed.
Prop 65 - Developmental toxicity, female
Substance is not listed.
Prop 65 - Developmental toxicity, male
Substance is not listed.
Information about limitation of use:
For use only by technically qualified individuals.
This product is subject to the reporting requirements of section 313 of the Emergency Planning and
Community Right to Know Act of and 40CFR372.
Other regulations, limitations and prohibitive regulations
Substance of Very High Concern (SVHC) according to the REACH Regulations (EC) No. /.
Substance is not listed.
The conditions of restrictions according to Article 67 and Annex XVII of the Regulation (EC) No
/ (REACH) for the manufacturing, placing on the market and use must be observed.
Substance is not listed.
Annex XIV of the REACH Regulations (requiring Authorisation for use)
Substance is not listed.
REACH - Pre-registered substances
Substance is listed.
Chemical safety assessment:
A Chemical Safety Assessment has not been carried out
Safety Data Sheet according to Regulation (EC) No. / (REACH). The above information is
believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our knowledge and is applicable to the
product with regard to appropriate safety precautions. It does not represent any guarantee of the
properties of the product.
Are you interested in learning more about nickel foam? Contact us today to secure an expert consultation!