Producers who understand sheep behaviour can use this knowledge to their advantage in all aspects of sheep production and management. Whether setting up and using handling and shearing facilities, moving the flock to a new pasture or catching an individual sheep, taking their behaviour into account ensures the job is completed in an efficient, low-stress manner.
If you want to learn more, please visit our website.
When moving or handling sheep, keep the following aspects of their behaviour in mind:
These observations of sheep behaviour have been established by people who have worked with sheep for many years under a wide range of conditions. Because these behaviours are very predictable, they can be used to the producer's advantage in all aspects of sheep management.
Taking sheep behaviour into account when managing your flock creates positive results:
Sheep handling in "make-do" pens is not only hard, difficult work, it is outright unpleasant. As a result, important jobs like vaccinating and deworming are often delayed or not done at all.
Well-designed sheep handling facilities are essential to a successful sheep production operation. Few other investments will create such labour efficiencies and savings. Most producers will only build, or purchase, one handling facility in their lifetime, so planning is essential.
Incorporate existing paddocks, laneways and barnyards into the handling system to allow for ample space when the flock is held in the yards for long periods of time. Sheep need to move smoothly between these areas with a minimum of fuss. To achieve this, a producer needs to understand how good design encourages the sheep and lambs to move ahead through the system without balking, thereby keeping problems for workers to a minimum.
Well-designed facilities are easy to operate, reducing stress, labour and their associated costs.
To ensure that the handling facility will accommodate all the required jobs, make a complete list of the operations that will be carried out, and plan how these jobs will be done.
A useful checklist includes:
Factors to be taken into consideration include:
In simple terms, handling facilities consist of:
Most producers can use nearby pastures and laneways as their low-density holding areas. These areas need to be secure enough to prevent sheep (particularly lambs) escaping from one area to the next. Consider using net wire fencing with openings no larger than 15 cm by 15 cm, secured to closely spaced posts.
High-density holding areas need to be built with medium-to-strong fencing materials. Make the area big enough to hold two sheep in full fleece per square metre. This creates enough room to drive the group into the yards, while leaving space for gates to swing and dogs to work (if dogs are used). It is important to make these areas long and narrow so that it is easy to control groups while they are driven into the forcing (crowding) area. According to recommendations from Australia and New Zealand, these high-density holding areas should be no wider than 10 m. If greater capacity is needed, it is better to lengthen them, rather than making them widerfootnote i[i].
A combined lead-up race and forcing pen that is 3 m wide has proven very effective in many handling facilities, particularly for large flocks. It allows large groups to be broken down into smaller groups for ease of handling. The drafting and working races will lead off from this area.
Triangular force pens (sometimes referred to as "V" force pens) are usually used in rectangular facilities and can be built in single or double forms (see Figure 1). In the single-triangular force pen, one side is an extension of the race fence, while the other side flares out at a 30-40 degree angle. The double force pen has two "wing" fences that flare out at similar angles and a central fence with a flip-flop gate at the race entrance to allow sheep to enter from either side.
Curved force pens (bugle) were thought to take advantage of sheep's inclination to follow flock mates that "disappear" around a curve and enable one person to efficiently process the sheep alone. However, more recent research has shown that in 1.5 m wide races, sheep move better through straight races than through curved races. Curved races are only superior when sheep move in single filefootnote ii[ii].
Some force pen designs do not work efficiently and should be avoided. These include square-shaped pens and the double-triangular force pens without a central fence (see Figure 2). The major problem with both of these designs is that sheep can easily avoid entering the race by turning suddenly (ringing) at the race entrancefootnote iii[iii].
For efficient drafting (sorting), the operator needs to be able to easily identify and draft the sheep he or she wishes to separate with a minimum of errors. To do this accurately requires an even flow of sheep. For small flocks, a two-way sort is satisfactory, but in larger-scale sheep operations, a three-way sort, using two gates, may be necessary.
Make the sorting race at least 3 m long, with the exit point showing a clear escape route for the sheep. The race walls need to have solid sides to prevent sheep from being distracted by those on the opposite side and disrupting the continuous flow of sheep. If the race is also used for drenching and vaccinations, consider a slightly wider race or one with adjustable sides.
The draft gate needs to be at least 1 m long to allow sheep to exit the race easily. Draft gates shorter than this cause sheep (particularly heavy-wooled and pregnant ewes) to jam against the edge of the race when exiting, slowing the flow significantly. There is some debate as to whether the draft gate should be made of solid sheeting or panels that sheep can see through. In Design of Sheep Yards and Sheds, Barber and Freemanfootnote iv[iv] give the following reasons for using gates that sheep can see through:
On the other hand, they also list reasons for using solid draft gates:
Sheep yards need a multipurpose handling race for drenching, vaccinating and other activities. Most producers in Ontario will opt for this type of race rather than separate handling races and drafting races.
Several different types of handling races can be built:
A suitable handling race is 6–15 m long with sides 85 cm high.
Figures 3 and 4 show basic handling facility layouts for sheep flocks with the key components identified, which can be constructed on farm from common materials. Table 1 provides dimensions for the various components of handling facilities.
For more information, please visit Aobiao.
Table 1. Yard dimensions in centimetres (100 centimetres = 1 metre)
Working race Facility Range (cm) Length 600–1,200 cm Width (fixed sides) 60–75 cm Width (adjustable sides) 45–80 cm Height 82–90 cm End gate height 110 cmWorking race comments:
Drafting race comments:
Gates comments:
Loading ramp to truck comments:
Adapted from Sheepyard and Shearing Shed Design, F. Conroy & P. Hanrahan, .
Few sheep producers have adequate handling facilities. Many use the excuse that they are too expensive to purchase or their flock is not big enough to justify the cost of buying or building them. Ask any producer who has a handling facility and their response is they would not raise sheep without one. Why the differing views? The answer is in the savings in labour and associated costs to justify investing in handling facilities.
A survey of Irish sheep farmers showed that those with good handling facilities spent 5.1 hours per livestock unit less across livestock species than those with poor handling facilities (L. Connolly, Irish Farmers' Journal). At six sheep per livestock unit, that equates to savings of 51 minutes per ewe or 85 hours per 100 ewes each year.
For a flock of 1,000 ewes, that is an extra 84.2 days that could be spent doing other things. If you value your time at $15 per hour, a handling facility will easily pay for itself in less than three years. Table 2 offers labour saving dollar values as a function of two flock sizes and different wages to demonstrate this point.
Table 2. Dollar value of labour savings in commercial flocks of varying sizes using differing wage rates and the time saving of labour. Adapted from L. Connolly, Irish Farmers' Journal.
Labour cost per hour Labour savings per 100 ewes (85 hr) Labour savings per 500 ewes (425 hr) $10/hr $850 $4,250 $15/hr $1,275 $6,375 $20/hr $1,700 $8,500 $25/hr $2,125 $10,625Just as important as the labour savings is the fact that all of those important handling jobs, like vaccination and deworming, get done when they should be done. Sorting for breeding, lambing, weaning and shearing takes very little time with a basic handling facility. In a basic setup, it is not uncommon for a single handler to be able to deworm or vaccinate 150 to 200 ewes per hour and sort 250 to 350 ewes per hour.
In summary, handling facilities:
If you currently do not have a handling facility and plan to continue raising sheep, you need to seriously question why you have not invested in one. Handling facilities are essential if producers expect to find any savings in labour and efficiencies in the management of their sheep.
Handling facilities that are designed and constructed to take advantage of sheep behaviour significantly reduce the stress of handling for the sheep and, just as importantly, for the handler. Sheep move willingly through such facilities, and handlers no longer dread those jobs that previously required brute strength to tackle, catch and move individual sheep.
This fact sheet was originally written by Anita O'Brien, sheep and goat specialist, Ontario Ministry of Agriculture, Food and Rural Affairs (OMAFRA), Kemptville, and updated by Christoph Wand, livestock sustainability specialist, OMAFRA, Guelph.
Diagram showing three shapes for penning that will move sheep from a large opening to a smaller opening. Arrows show the direction of movement from the large area to the smaller area. The single-triangular force pen design is on the left. One side is of this force pen is straight, while the other flares out at an angle. The double-triangular force pen is in the middle. Both sides of this force pen flare out, while a central gate divides the pen in half. The bugle force pen is on the right. Both sides of this pen curve to the right.
Diagram of unsuccessful force pen shapes. A square force pen design is on the left. It is a large square with a small opening at the top left. The double triangle force pen is drawn on the right. It is a very large triangle with a small opening at the top of the triangle.
Diagram of a bugle handling facility. The facility is shaped like a U on its side, with the open part of the U facing the left hand side. The top right portion of the U is wide and the bottom part is small. The animals move from the wide to the narrow part following the sideways U shape.
Diagram of a basic sheep handling facility for sheep flocks. It is an upside down L-shape. Moveable gates allow the holding pens to be divided into small sections to create holding pens and force pens. The animals move from the top of the upside down L, along the side, to the bottom of the upside down L. At the bottom, the animals can then be forced into a smaller area along the side of the L for handling.
Selecting the right sheep yard for your operation can be a daunting process. There is a lot ofinformation on the internet and in print media that can provide more questions than answers leading to confusion and buyer’s paralysis. This guide explores what to look for when in the market for sheep yards and provides insight in the benefits of high-quality materials, innovative design, efficient layouts, flexibility and most importantly the safety and comfort of your livestock.
We work closely with farmers to listen and understand what they need and how our sheep yards and farm handling equipment can assist with effective and efficient farming operations. Our portable sheep yards are purpose built for tough Australian farming conditions, can be set-up easily in 20 minutes and come with a built-in trailer.
Winner of Dowerin Inventor Award in , McDougall portable sheep yards have a hard-earned reputation for quality, durability, reliability, and easy set-up. The efficiency of our design streamlines sheep handling operations and reduces stress on both the livestock and handlers.
Our sheep yards are available in 45-panel sheep yard and 52-panel sheep yard. The 45-panel sheep yard features a main holding yard, a five-metredouble handling race and three-way draft. The 45-panel sheep yard extends into three drafting pens and a small marking pen with abuilt-intrailer for easy transport and the option of a 12-volt winch.The 52-panel sheep yard features a main holding yard, 9-metre double handling race, three-way draft, three drafting pens and a small marking pen with the option of an electric or handwinch. The 52-panel sheep yard is ideal for tailing, mulesing, race crutching and jetting. If both these solutions are too big we have a custom 25 pannel solution as well.
Ensuring the safety of your livestock and working animals is critical. Our sheep yard design ensures the smooth flow of livestock reducing stress and injury. The gate and panels are easy to assemble, and the built-in trailer on our portable sheep yards allows for the quick and efficient load and unloading of panels.
We can deliver our portable sheepyards anywhere in Australia through our national distribution network.
McDougall Weldments, a family-owned and operated business, and local stock handling manufacturer, also manufacture a range of high quality agricultural and industrial equipment including portable sheep yards, augers, mobile sheep feeders, mobile lot feeders, fixed sheep and cattle feeders, seed and super bins, chaser bins, restoration and refurbishment of old farming equipment.
If you are looking for more details, kindly visit Sheep Yard Panel.