G-FENCE 3000

Solar-powered Fence-mounted Intrusion Detection

• EASY INSTALLATION : Standalone solution, minimal civil engineering, virtually infrastructure-free

• RELIABILITY : Distributed intelligence – each sensor has its own signal processing so if one sensor fails, the rest of system continues to work; event filtering eliminates environmental alarms caused by wind, rain and allows for more reliable alarm information; redundancy of alarm information (open loop)

• ACCURACY : Zoning feature (up to 4×128 zones) gives precise location capability of cuts, climbs, lifts of fence for verification

• EFFICIENCY : Reduced time for installation and maintenance – sensing is in accelerometer, not the cable; detection zones easily set-up

Overview

G-FENCE is a fence-mounted intrusion detection system for perimeter fences. The fence detection cable uses accelerometers to detect fence vibrations generated by intrusion attempts made by cutting, climbing or lifting the fence. Upon an intrusion, the system transmits alarm information via the MAXIBUS 3000 Hub for verification in the control room.
Each G-FENCE system/loop can secure up to 2 miles (3200m) of a perimeter with pinpoint intrusion location to within 10 feet (3m). You can connect up to 4 loops (8 miles) to PROTECH’s Maxibus and running (4) RS485 lines on the perimeter.

The control unit is solar powered with batteries resulting in minimal infrastructure at the site. Unique to the market, G-FENCE guarantees a 1 second alarm response time.

Set-up, maintenance and detection sensitivity adjustments are easily facilitated. A mapping software application allows the system to locate by zone by superimposing it over a site plan or picture.
G-FENCE is compatible with leading Video Management Systems such as Milestone and Genetec.